DEVELOPMENT OF PASTERIZATION MODES FOR HIGH-SUGAR CANS IN CONTINUOUS ACTING PASTEURIZERS
https://doi.org/10.21323/2618-9771-2019-2-4-48-52
Abstract
High-sugar canned fruits, such as jam, marmalade, confiture, are characterized by a high content of soluble dry solids and high acidity, which allows to apply to them pasteurization processes as heat treatment. In comparison with sterilization processes, heat treatment of hermetically sealed canned food during pasteurization is implemented at temperatures less than 100°C.
The article presents the results of the development of scientifically-based pasteurization modes for high-sugar canned food for industrial continuous-acting pasteurizers (CAP — continuous-acting pasteurizers) of open type with a temperature in the heating area less than 100°C. For today, such pasteurizers are widely spread due to the simplicity of their design, high productivity, with the option to reduce consumption of water, steam, electricity and to use it for the various types of packaging. So, the actual task of this article is the establishment of canned fruit pasteurization modes for such pasteurizers.
The development of pasteurization modes for high-sugar canned food using strawberry jam as a sample was carried out in the experimental equipment simulating the operation of a continuous-acting pasteurizer. The studies were implemented to confirm that the developed modes of heat treatment in the CAP as a matter of fact provide industrial sterility of the produced high-sugar canned food. Optimal pasteurization modes have the following parameters: heat treatment in an autoclave sterilizer at a heating temperature of the heating medium 97°C and stage-by-stage cooling of the products with water at temperatures 70°C, 50°C and 30°C.
About the Authors
G. P. Pokudina
Russian Research Institute of Canning Technology — Branch of V. M. Gorbatov’s Federal Research Center for Food Systems of RAS
Russian Federation
Russian Federation
Galina P. Pokudina — senior Researcher, Laboratory of canning production processes and equipment
142703, Moscow region, Vidnoye, School str, 78
M. V. Trishkaneva
Russian Research Institute of Canning Technology — Branch of V. M. Gorbatov’s Federal Research Center for Food Systems of RAS
Russian Federation
Russian Federation
Marina V. Trishkaneva — candidate of chemical sciences, leading researcher, Laboratory of scientific and technical analysis
142703, Moscow region, Vidnoye, School str, 78
R. A. Volkova
Russian Research Institute of Canning Technology — Branch of V. M. Gorbatov’s Federal Research Center for Food Systems of RAS
Russian Federation
Russian Federation
Raisa A. Volkova — leading research scientist, Laboratory of quality and food safety
142703, Moscow region, Vidnoye, School str, 78
References
1. Marszałek, K., Woźniak, Ł., Skąpska, S., Mitek, M. (2017). High pressure processing and thermal pasteurization of strawberry purée: quality parameters and shelf life evaluation during cold storage. Journal of Food Science and Technology, 54(3), 832–841. DOI: 10.1007/s13197–017–2529–4
2. Peng, J., Tang, J., Barrett, D.M., Sablani, S.S., Anderson, N., Powers, J.R. (2017). Thermal pasteurization of ready-to-eat foods and vegetables: Critical factors for process design and effects on quality. Critical Reviews in Food Science and Nutrition, 57(14), 2970–2995. DOI: 10.1080/10408398.2015.1082126
3. Rolfey, E.J., M. Caryl, Robson, L.G. et al. (1980). Food products with intermediate moisture. Moscow: Food industry. — 208 p.
4. Silva, F.V.M., Gibbs, P.A. (2009). Principles of thermal processing: pasteurization. Chapter 2 in book: Engineering Aspects of Thermal Food Processing. CRC Press, Taylor and Francis Group, Boca Raton, USA. ISBN: 978–1–4200–5858–1
5. Kondratenko, V.V., Levshenko, M.T., Petrov, A.N, Pozdnyakova, T.A., Trishkaneva, M.V. (2019). Comparative evaluation of approaches to modelling kinetics of microbial thermal death as in the case of Alicyclobacillus acidoterrestris. Foods and Raw Materials, 7(2), 348–363. DOI: 10.21603/2308–4057–2019–2–348–363
6. Babarin, V.P. (2006). Handbook of sterilization of canned food. St-Peterburg: Giord, — 306 p. ISBN: 5–98879–039–9
7. Evelyn, Silva, F. V. M. (2018). Differences in the resistance of microbial spores to thermosonication, high pressure thermal processing and thermal treatment alone. Journal of Food Engineering, 222, 292–297. DOI: 10.1016/j.jfoodeng.2017.11.037
8. Levshenko, M.T., Kanevsky, B.L. (2018). Calculation optimization of microorganisms required letality at the sterilization and pasterization modes development of homogeneous fruit preserves. Collection of scientific papers «Actual problems of the beverage industry», 2, 81–86. DOI: 10.21323/978–5–6041190–3–7–2018–2–81–86
9. Pereira, R., Martins, J., Mateus, C., Teixeira, J., Vicente, A. (2007). Death kinetics of Escherichia coli in goat milk and Bacillus licheniformis in cloudberry jam treated by ohmic heating. Chemical Papers, 61(2). DOI:10.2478/s11696–007–0008–5
10. Setlow, P., Johnson, E. (2019). Spores and Their Significance, p. 23–63. In Doyle M, Diez-Gonzalez F, Hill C (ed), Food Microbiology: Fundamentals and Frontiers, 5th Edition. ASM Press, Washington, DC. DOI: 10.1128/9781555819972.ch2
11. Worobo, R. W., Splittstoesser, D. F.(2004). Microbiology of fruit products, p. 161–284. In D. M. Barret, L. Somogyi, H. Ramaswamy (Eds.), Processing fruit 2005, 2nd ed., pp. 161–284. Boca Raton: CRC Press, Taylor and Francis Group. DOI: 10.1201/9781420040074.ch12
12. Lewis, M. (2010). Engineering Aspects of Thermal Food Processing. International Journal of Dairy Technology, 2010, 63(4), 601–602. doi:10.1111/j.14710307.2010.00592.x
13. Maslov, A.M. (1980). Devices for heat treatment of highly viscous liquids. Leningrad: Mashinostroenie. — 206 p.
14. Aminov, M.S., Muradov, M.S., Aminova, E.M. (1999). Processes and devices of food production. Moscow: Kolos. — 504 p.
15. Gut, J.A.W., Pinto, J.M. (2003). Selecting Optimal Configurations for Multisection Plate Heat Exchangers in Pasteurization Processes. Industrial and Engineering Chemistry Research, 42(24), 6112–6124 doi:10.1021/ie0303810
16. Kiziltaş, S., Erdo ǧ du, F., Koray Palazo ǧ lu, T. (2010). Simulation of heat transfer for solid–liquid food mixtures in cans and model validation under pasteurization conditions. Journal of Food Engineering, 97(4), 449–456. DOI: 10.1016/j.jfoodeng.2009.10.042
17. Derossi, A., De Pilli, T., La Penna, M.P., Severini, C. (2012). Prediction of heating length to obtain a definite F value during pasteurization of canned food. Journal of Food Process Engineering, 36(2), 211–219. doi:10.1111/j.1745–4530.2012.00674.x
Review
For citations:
Pokudina G.P., Trishkaneva M.V., Volkova R.A. DEVELOPMENT OF PASTERIZATION MODES FOR HIGH-SUGAR CANS IN CONTINUOUS ACTING PASTEURIZERS. Food systems. 2019;2(4):48-52. https://doi.org/10.21323/2618-9771-2019-2-4-48-52
Views: 670
Email this article 